LED Recessed Light - Super Thin LED fixture for ceiling, under cabinet and other limited space lighting applications.
- 50 W halogen equivalent but uses only 9 W
- Super bright light without IR and UV rays
- White trim; milky cover to prevent glare
- Dimmable* driver included (only the 120V AC version is dimmable)
- Option of 120 V AC or 12 V DC input
- Two years warranty
Parameters:
Driver Input Voltage: 100 - 140 V AC or 12V DC
Driver Output Voltage (operating voltage of the fixture): 32 V DC
Driver certification: C UL US file number E338513
Light Source: 40 pieces LED
Total Power Consumption LED Recessed Light and Driver: 9 W
Halogen equivalent: 50 W
Beam Angle: 120°
Available Light Colours: Warm White 3,000K; Neutral White 4,500K
Luminous Flux: Warm White 550 lm, Neutral White 600 lm
Rated Life: 30,000 hours
Dimensions: trim diameter 120 mm (4.7"); mounting hole diameter 106-112 mm (4.2-4.4"); thickness 12 mm (0.5"); height of the mounting clips 25 mm (1")
Aluminum body and white trim, milky plastic cover.
LED Recessed Light installation instructions:
Drill hole with 106-112 mm (4.2-4.4") diameter in the mounting surface. Plug the light fixture into the hole while holding the retaining springs in upright position. Connect the LED light to the driver with the plug-in connector. Driver should be hard wired to line voltage (or 12V DC). Depending where you want the driver to be placed, you can extend the line voltage cable to the driver or the low voltage cable between the driver and the lighting fixture. Recessed pot can (housing) is not included and we do not sell such. Insulation should not touch the metal surface of the back of the fixture to allow free air flow and proper cooling.
Every fixture comes with one UL classified external power supply Class 2 (LED driver).
It is not possible to connect more than one fixture to one driver.
The
LED Recessed Light itself has not been certified, but it operates on low voltage.
Generates very little heat.
Dimmable and Air-Tight. Suitable for damp locations.
Do not install at directly exposed to water locations.
*DIMMABLE (120V AC version only). The 12V DC version is NOT dimmable.
Please not that the dimmable version of the drivers is compatible with TRIAC dimmers. These are the less-expensive old-fashioned incandescent dimmers that you can purchase from hardware stores. PWM (Pulse-Width Modulation) dimming systems like remote-controlled ones may cause flickering.
