Recessed LED Lights for displays and under-cabinet lighting, 25W halogen equivalent.
- Uses only 5 Watt and generates very little heat
- Adjustable light beam without IR and UV rays
- Two years warranty
Parameters:
Driver Input Voltage: 120V AC
Light Source: 3 x 1 W high power Bridgelux LED (USA)
Total Power Consumption LED Recessed Light and Driver: 5 W
Halogen equivalent: 25 W
Beam Angle: 60°
Available Light Colours: Neutral White 4,500K, Warm White 3,000K
Luminous Flux: Neutral 210 lm, Warm White 180 lm
Rated Life: 30,000 hours
Dimensions: trim diameter 90 mm; mounting hole diameter 70-80 mm; height 48 mm
Aluminum body and trim, clear plastic lens.
Default beam angle is 60° but custom-made fixtures (minimum order 20 pieces) with 30° and 45° lens are available with delivery time of 3 weeks.
Recessed LED Lights installation instructions:
Drill holes with 70 to 80 mm diameter in the mounting surface. Plug the light fuxtures into the holes while holding the retaining springs in upright position. Connect the LED lights to the drivers with the plug-in connectors. Drivers should be hard wired to line voltage. Depending where you want the drivers to be placed, you can extend the line voltage cables to the drivers or the low voltage cables between the drivers and the lighting fixtures. Recessed pot cans (housings) are not included and we do not sell such. Insulation should not touch the metal fans of the back of the fixture to allow free air flow and proper cooling.
Every fixture comes with one UL classified external power supply Class 2 (LED driver).
Not Dimmable - Do Not Use with Dimmers.
Do not install at directly exposed to water locations.
These
Recessed LED Lights are NOT Air-Tight.
