- 6″ Round Deep Regressed LED – Elegant Design Without Glare
- Commercial Grade Quality Built To Last
- Type IC, Air-Tight & WET – No Housing Required
- 3 1/2″ Deep – Install Where Ceiling Space Is Limited
- High Lumen Output & CRI 90+
- Armoured Cable & Metal Connectors – Open Plenum Rated
- Driver Inside Connection Box with Romex Quick Connectors
- Warranty: 10 Year Residential, 5 Year Commercial Installation
- model: LD6R
Video Overview
Discover Deep Regressed LED Lights
Technical Specifications
CONSTRUCTION:
6″ Round Deep Regressed LED – Elegant Design Without Glare. Driver Inside Connection Box with Romex Quick Connectors.
One driver for every fixture required.
MOUNTING:
Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips.
Ceiling Clearance Required: 3″
- Default Driver Input Voltage: 120V AC ( TRIAC Dimmable)
- Optional Driver Input Voltage: 120V-347V AC (Not Dimmable)
- Power factor: 0.98
- Energy Used: 18W
- Halogen equivalent: 150W
- Beam Angle: 38°
- Light colour options: Warm White 2700K, Soft White 3000K, Neutral White 4000K and Dim to Warm 3000K – 2000K
- Light output: Warm White 1500 lm, Soft White 1550 lm, Neutral White 1650 lm, Dim to Warm 1150
- CRI: 90+
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus, Energy Star (except DTW), T24
DIMENSIONS:
- ID 6 1/8″; OD 6 3/4″; Thickness 3 1/2″
- Cut out: 6 1/4″ to 6 1/2″
- Junction Box Dimensions (with driver inside): 3 3/4″ x 3 3/8″ x 1 1/2″
Suitable for insulated ceilings, open plenum, and wet locations.
Trim Colour Options
White Reflector – White Trim | WR-WT Black Reflector – Black Trim | BR-BT
Silver Reflector – White Trim | SR-WT Silver Reflector – Black Trim | SR-BT
Accessories
Optional 120-347V Input Driver
- 0-10V Dimmable
- cat # LLL-LD2050TR
Flat Rough-In Plate
- cat # RIP6
Flanged Rough – In Plate
- cat # FRP6
Low Voltage Extension Cable
-
- cat # MEC10
Goof Ring Round OD 7 5/8″
- White – cat #GR6
Downloads
Specification Sheet:
